High Quality ISO standard Anti Thermal Firefighter Rescue Belt

Fire safety belt are made of polyamide fiber or polyester fiber and high strength of metal. High strength, impact resistance, good flame retardant performance, light weight, wear resistance and corrosion resistance, no mildew and moth resistance characteristics. It is a good protective device for the firefighter climbing and self rescue  . Also used for labor protection supplies

 Specifications:

1. L*W  110*7cm

2. Design load.1.33kN

3. Structure: belt length continuously adjustable, the ribbon, andneedle buckle, rings and a pull ring.

4. Weigt: < 0.85kg.

5. The static load performance:

    Upright direction: 13Kn    time 5min safety belt can not dropped from body.

    Inverted direction: 10kN   time 5min safety belt can not dropped from body.

    Horizontal direction: 10kN  time 5min safety belt can not dropped from body.

6. Shock resistance: impact height is 1m, the safety belt is not released from the model release, no obvious damage.

7. High temperature performance: high temperature test, does not melt & coking.

8. Metal corrosion resistance: neutral salt spray test, the appearance was consistent with GB / T6461 - 2002  appearance rating slight grade standard.