outer shell safety security shirt with reflective tape fire retardant work clothes

Outer Shell Safety Security Shirt With Reflective Tape Fire Retardant Work Clothes

Strengthed  the shoulder, elbow, knee. Hem with large pockets, pocket bottom corners have a water drain hole. Reflecting sign belt, seam, sleeve seam, batwing joints in main stitch are double needle, and using the Fang anti- temperature line. Cuff trousers, leather bags, waterproof rib cuffs, and a thumb ring buckle design, rib cuff material for aromatic fiber. Elastic belt use strong elastic rubber band. Garment fit, with high protection grade, ightweight non-removable integrated  fire protective clothing.

The product comply with  GA10-2002"firefighter protective clothing"and ZGZ-ZPJY-001 2009"Fireman fire fighting protective clothing mandatory inspection scope rules "standard .

Fireman fire fighting protective clothing is to protect firefighters in addition to the head, neck, hands, feet, body protective clothing. In the normal state of firefighting, can be protect firefighters in a long time ; In a dangerous state water gun protection should be taken, Should avoid direct touch with flames and molten metal.

In order to protect the firefighters, must fasten the all parts of clothing such as buckles, buttons, zippers, hooks, collar, neck and so on. Attention to have any negligence

Fireman fire fighting protective clothing must be used in conjunction with other protective equipment such as helmets, face masks, gloves, fire, boots, respirators and so on.

1. Fireman fire fighting protective  clothing have jacket and pants .T-shirt for the wide body structure, under the pants strap structure.

2. Not less than 50mm width of 360° reflective/fluorescent signs for easy indentification in the coat of protective clothing bust, hem, cuffs and bottom of trousers .

3. The collar design specific neck structure to prevent the flame injury.

4. All pockets are designed for a loose three dimensional ,in order to place a variety of communications equipment and fire tools .In addition ,the pocket at the bottom have a leaking hole.

5. The  protective clothing through clothing mandatory inspection of compliance.

6. This protective clothing in the shoulder, elbow and knee bits used to strengthen the grid line processing .